Home > Parts > Ford Clutch
Sort By:
Page of 1
Clutch Pilot Bearing Clutch Pilot Bearing

Clutch pilot bearing for the 8N, 9N, 2N, Jubilee, NAA, 600, 700, 800, 900 series tractors as well as the following:


1800 Series 4 Cyl 59-60, 1801 Indust/Const, 1811 Indust/Const, 1821 Indust/Const, 1841 Indust/Const, 1871 Indust/Const, 1881 Indust/Const, 2000 3 Cyl Tractor, 2000 Series 4 Cyl 62-64, 2031, 2100, 2110 3 Cyl Tractor, 2110TR 4 Cyl, 2111, 2120 3 Cyl Tractor, 2120 4 Cyl, 2130, 2131, 2150, 2300, 230A, 231, 2310, 233, 234, 250C, 2600, 2600N, 2600R, 2600V, 260C, 2610, 2610V, 2810, 2910, 2N, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3230, 3300, 3310, 3310N, 333, 3330, 334, 335, 340, 3400, 340A, 340B, 3430, 345C Indust/Const, 345D Indust/Const, 3500, 3550 Indust/Const, 3600, 3600N, 3600NO, 3600R, 3600V, 3610, 3610NO, 3610V, 3900, 3910, 3910H, 3910N, 3910V, 3930, 3930H, 4000 Series 3 Cyl 65-74, 4000 Series 4 Cyl 62-64, 4030, 4031, 4040, 4100, 4110, 4110N, 4110O, 4110TR, 4110V, 4120, 4121, 4130, 4130N, 4130NO, 4131, 4140, 4190, 420 Indust/Const, 4200, 4330, 4340, 4400, 4410, 445 Indust/Const, 445A Indust/Const, 445C Indust/Const, 445D Indust/Const, 450 Indust/Const, 4500 Indust/Const, 455 Indust/Const, 4600, 4600NO, 4600O, 4600SU, 4610, 4610N, 4610NO, 4610O, 4610SU, 4610V, 4630, 4630N, 4630NO, 4630O, 4830, 4830N, 4830O, 5000, 501, 501 Series 4 Cyl, 5030, 5030O, 5100, 515 Indust/Const, 5190, 5200, 530A, 530B, 531, 5340, 535 Indust/Const, 540 Indust/Const, 540A Indust/Const, 540B Indust/Const, 541, 545 Indust/Const, 545A Indust/Const, 545C Indust/Const, 545D Indust/Const, 550 Indust/Const, 555 Indust/Const, 555A Indust/Const, 555B Indust/Const, 600, 600 Series 4 Cyl, 601, 601 Series 4 Cyl, 611, 620, 621, 63-64, 630, 631, 640, 641, 650, 651, 655 Indust/Const, 655A Indust/Const, 661, 671, 681, 700, 700 Series 4 Cyl, 701, 701 Series 4 Cyl, 740 Indust/Const, 741, 771, 800, 800 Series 4 Cyl, 801, 801 Series 4 Cyl, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 8N, 900, 900 Series 4 Cyl, 901, 901 Series 4 Cyl, 941, 951, 960, 961, 971, 981, 9N, Dexta, NAA, NAB, Super Dexta

Our Price: $4.95
Clutch Line-Up Tool Clutch Line-Up Tool

Clutch alignment tool for both Ford 9" and 10" clutches (ten spline).

This is essential--if you purchase the clutch disc individually, be sure to also get a line-up tool. It will save you a lot of trouble when you put your two halves of the tractor back together.

Our Price: $9.95
Hydraulic Pump O-Rings and Gasket Hydraulic Pump O-Rings and Gasket

Four o-rings and one gasket for the re-installation of a round piston-style Ford hydraulic pump.

Temporarily back-ordered. Estimated re-stock date is July 27.

Our Price: $9.95
Release Bearing (Throw-out Bearing) Release Bearing (Throw-out Bearing)

Release bearing (a.k.a. throw-out bearing) for several models of Ford tractors including the 9N, 2N, 8N, Jubilee, NAA, 501, 600, 700, 800, 900, early 2000 and 4000 with 4 cylinder engines.

It will also fit the less-common 1800 Series 4 Cyl 59-60, 2000 Series 4 Cyl 62-64, 2030 Compact Tractor, 2150, 2300, 230A, 231, 2310, 233, 234, 2600, 2600V, 2610, 2810, 2910, 3055, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 334, 335, 3400, 3500, 3550 Indust/Const, 3600, 3600V, 3610, 3900, 3910, 4000 Series 4 Cyl 62-64, 4030, 4040, 4110, 4120, 4130, 4140, 4190, 4330, 4340, 4600, 4600SU, 4610, 5000, 5190, 530A, 5340, 650, Dexta, Super Dexta.


Our Price: $20.95
Flywheel Ring Gear, Ford Flywheel Ring Gear, Ford

Flywheel ring gear for Ford 9N, 2N, 8N, Jubilee, NAA 501, 600, 700, 800, 900 series tractors as well as 2000 and 4000 Series with 4 cylinder engines (1962-1964).

134 teeth, 13 1/2" OD by 12" ID.

Our Price: $33.75
Clutch Disc, 9" Clutch Disc, 9"

High-quality clutch disc for a Ford tractor with a 9" clutch (ten spline).

This disc will fit a Ford 8N, 9N, 2N, NAA or Jubilee as well as some 501, 600, 700, 800, 900 series tractors and early 2000 and 4000 with 4 cylinder engines when equipped with a 9" clutch.

In addition, this disc will also fit an 1800 Series 4 Cyl 59-60, 4120, 4130, 4140, Dexta, Super Dexta with 9" clutches.

Many mechanics choose to re-use their existing pressure plate and only replace the disc. If this is the route you desire to go, you can purchase the disc individually. Consider also ordering a clutch alignment tool to make the job a little easier.

Our Price: $39.95
Clutch Disc, 10" Clutch Disc, 10"

High-quality clutch disc for a Ford tractor with a 10" clutch (ten spline).

This disc will fit a 2131, 4120, 4121, 4130, 4131, 4140, 501 Series 4 Cyl, 600, 601, 601 Series 4 Cyl, 620, 621, 630, 631, 640, 641, 650, 651, 701 Series 4 Cyl, 740 Indust/Const, 741, 800, 801, 801 Series 4 Cyl, 820, 821, 840, 841, 850, 851, 900, 901, 941, 950, 951, NAA, NAB.

Many mechanics choose to re-use their existing pressure plate and only replace the disc. If this is the route you desire to go, you can purchase the disc individually. Consider also ordering a clutch alignment tool to make the job a little easier.

Please measure your existing clutch disc before ordering to ensure you order the correct size. Measure the diameter from side to side as well as count the splines.

Our Price: $84.95
Ford Clutch Kit, 9" Ford Clutch Kit, 9"

Clutch kit for antique Ford tractors with a 9" clutch (ten spline). The kit includes the pressure plate, clutch disc, pilot bearing, release/throw-out bearing and alignment tool.

Please measure the clutch on your tractor before ordering to ensure you order the correct size.


This 9" clutch will fit an 8N, 9N, 2N, Jubilee or NAA. It will also sometimes fit an 1800 Series 4 Cyl 59-60, 1801 Indust/Const, 1821 Indust/Const, 1841 Indust/Const, 2000 Series 4 Cyl 62-64, 2031, 2131, 4000 Series 4 Cyl 62-64, 4031, 4110TR, 4120, 4121, 4130, 4131, 4140, 501 Series 4 Cyl, 5010S, 541, 600, 601, 620, 621, 630, 631, 640, 641, 650, 651, 700, 701 Series 4 Cyl, 740 Indust/Const, 741, 800, 801, 820, 821, 840, 841, 850, 851,9000, 901, 941, 950, 951, NAB

Our Price: $146.95
Ford Clutch Kit, 10" Ford Clutch Kit, 10"

Clutch kit for antique Ford tractors with a 10" clutch. Select either ten-spline (pictured) or fifteen-spline (not pictured). .

The kit includes the pressure plate, clutch disc, pilot bearing, release/throw-out bearing and alignment tool.

Please measure the clutch and count the splines on your tractor before ordering to ensure you order the correct size.


This 10" clutch will fit a Ford 501 Series 4 Cyl, 5010S, 600, 601, 601 Series 4 Cyl, 621, 631, 641, 651, 701 Series 4 Cyl, 800, 801, 801 Series 4 Cyl, 821, 841, 851, 941, 951. However, some of these above models could have also been equipped with a 9" clutch--therefore, it's important to measure your clutch before ordering.

Our Price: $189.95